Juniper MX2010 Manual page 79

Table 10: MX2010 DC Power Supply Module LEDs
Label Color
PWR OK Green
Yellow
–
FAULT Red
–
INP0 Green
Yellow
–
INP1 Green
Yellow
–
9. Repeat Steps 1 through
State Description
On PSM is functioning normally with no alarms.
On PSM controller is functioning normally.
Off PSM is not functioning normally or the PSM controller is off.
On PSM is not functioning normally or the DC input voltage of one or
more feeds is out of range.
Off PSM is functioning normally or both DIP switches are set to off.
On DC input is within required voltage range and the DIP switch is set
to on.
On DC input is detected but voltage is out of range.
Off DC input to the PSM is not present.
On DC input is within required voltage range and the DIP switch is set
to on.
On DC input is detected but voltage is out of range.
Off DC input to the PSM is not present.
8 for installing PSMs in slots 0, 1, and 2, where required.
76