Table of Contents
Advertisement
NOTE: A minimum of 38 in. (96.5 cm) of clearance is required to roll the chassis sideways.
NOTE: A minimum of 42 in. (106.7 cm) of circular space is required to rotate the chassis.
NOTE: The router transport kit handles can be removed to accommodate aisle width.
3.
Adjust the height of the router by turning the handles clockwise until the router transport platform
is approximately 0.75 in. (1.9 cm) above the bottom of the rack opening (see
NOTE: Because of the short lift capability of the router transport kit, we recommend that
you install the router on the bottom of the rack.
NOTE: Make sure that the bubbles within the T-shaped levels are between the lines,
indicating that the router is level.
4.
Adjust the four leveling mounts on the router transport platform until all four leveling mounts rest
firmly on the ground (see
Figure 30 on page
50).
Figure 26 on page
43).
49
Advertisement
Table of Contents
