Table of Contents
Advertisement
NOTE: The router transport kit is equipped with four T-shaped levels on top of each of the
four router transport mounting brackets. Make sure the bubbles within the T-shaped levels
are between the lines, indicating the chassis is level.
CAUTION: Do not raise the chassis above 1 in. (2.54 cm). This will ensure the router
will not tilt when transporting, which can result in injury or damage to the router.
4. Turn the four wheels on the router transport kit toward the rear of the chassis.
5. Grasping the handles on the shipping covers, carefully guide the chassis down the crate ramp to the
rack location.
WARNING: Do not push or pull the router fast while transporting. Using excessive
speed can cause the wheels to turn abruptly and tilt the router over.
CAUTION: Do not lift the router by using the handles on the shipping covers. Use
these handles only to help position the router.
6. Position the router transport platform directly under the router, aligning the router transport
platform with the bottom of the chassis by adjusting the four leveling mounts.
NOTE: The router transport platform height can be adjusted from 0.25 in. (0.6 cm) to a
maximum of 4 in. (10.16 cm).
7. Secure the router transport platform to the router transport mounting plates by using the four latch
locks (see
Figure 23 on page
38).
37
Advertisement
Table of Contents
