Table of Contents
Advertisement
user-name @ host-name >
2. Configure the IP address of the DNS server.
[edit]
root# set system name-server
3. Configure the router's domain name.
[edit]
roott# set system domain-name
4. Configure the IP address and prefix length for the router's management Ethernet interface.
[edit]
root # set interfaces fxp0 unit 0 family inet address
5. Configure the IP address of a backup Routing Engine. The backup Routing Engine is used while the
local router is booting and if the routing process fails to start. After the routing process starts, the
backup Routing Engine address is removed from the local routing and forwarding tables.
[edit]
root# set system backup-router
6. (Optional) Configure the static routes to remote subnets with access to the management Ethernet
port. Access to the management Ethernet port is limited to the local subnet. To access the
management Ethernet port from a remote subnet, you must add a static route to that subnet within
the routing table.
[edit]
root# set routing-options static route
readvertise
7. Configure the telnet service at the [edit system services] hierarchy level.
[edit]
root#set system services telnet
address
domain-name
address
remote-subnet next-hop destination-IP retain no-
address/prefix-length
80
Advertisement
Table of Contents
