Use The Pallet Jack With Attachment To Install The Router - Juniper MX2010 Manual

5. Adjust the four pallet jack attachment brackets until they fit under the pallet jack legs.
6. Tighten the torque fasteners using a 9/16-in. (14 mm) socket wrench to secure the brackets on the
pallet jack attachment to the pallet jack (see
Figure 13: Installing MX2010 Pallet Jack Attachment

Use the Pallet Jack with Attachment to Install the Router

Before installing the router, you must remove all components (see
To install the router using a pallet jack with attachment:
1. Ensure that the rack or cabinet is in its permanent location and is secured to the building. Ensure
that the installation site allows adequate clearance for both airflow and maintenance. For details,
see the MX2010 Universal Routing Platform Hardware
Figure 13 on page 23).
"Remove Components" on page
Guide.
23
15).