Table of Contents
Advertisement
ACX5448 Universal Metro Router Quick Start Guide
Tools Required to Prepare the ACX5448 Router for Installation
Mounting brackets, supplied with the router
Twelve screws for securing the mounting brackets to the chassis, supplied with the router
Eight mounting screws, not supplied
Phillips (+) screwdriver, number 2, not supplied
Step 2: Install the ACX5448 Chassis in the Rack
To install the router in a rack or cabinet:
Position the router in front of the rack or cabinet.
1.
Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and to a site ESD point.
2.
Align the holes in the front mounting brackets with the holes on the side of the chassis (see
3.
Figure 8: Attaching the Mounting Brackets
Using a Phillips (+) number 2 screwdriver, secure the mounting brackets to the router using the mounting screws.
4.
With one person on each side, hold on to the bottom of the chassis and carefully lift it so that the mounting brackets contact
5.
the rack rails.
Carefully slide the router onto the mounting brackets until the front-mounting brackets attached to the chassis contact the
6.
rack rails (see
Figure
9).
Figure 9: Installing the Router in a Four-Post Rack
Install mounting screws into each of the open front-mounting holes aligned with the rack, starting from the bottom, and secure
7.
them tightly.
Figure 10
shows the router fully secured to the front rails of the four-post rack.
6
Figure
8).
Copyright © 2018, Juniper Networks, Inc.
Advertisement
Table of Contents
