Step 3: Install The Router; Unpack The Router - Juniper MX2010 Manual

Step 3: Install the Router

IN THIS SECTION

Unpack the Router | 12

Remove Components | 15
Install the Router Using a Pallet Jack with Attachment | 22
Install the Router Using a Router Transport Kit | 29
• "Unpack the Router" on page 12
• "Remove Components" on page 15
• Install the router using one of the following procedures:
• "Install the Router Using a Pallet Jack with Attachment" on page 22
• "Install the Router Using a Router Transport Kit" on page 29
Unpack the Router
The router is shipped in a wooden crate. A wooden pallet forms the base of the crate. The router chassis
is bolted to this pallet. A large rack mount tray, pallet jack attachment, EMI covers, and a cardboard
accessory box are also included in the shipping crate.
Before removing the router from the shipping crate, you must remove all components (see
Components" on page 15).
Because of the router's size and weight—up to 985 lb (446.79 kg) depending on configuration—we
strongly recommend that you install the router by using a router transport kit or a pallet jack with pallet
jack attachment.
NOTE: The router is maximally protected inside the shipping crate. Do not unpack it until you are
ready to begin installation.
12
"Remove