Table of Contents
Advertisement
73
Figure 41: Connecting Ground and DC Power Cables
CAUTION: Ensure that each power cable lug seats flush against the surface of the
terminal block as you are tightening the nuts. Ensure that each nut is properly
threaded onto the terminal stud. The nut should be able to spin freely with your
fingers when it is first placed onto the terminal stud. Applying installation torque to
the nut when the nut is improperly threaded might result in damage to the terminal
stud.
CAUTION: The maximum torque rating of the terminal studs on the DC PDM is 25
lb-in. (33.89 Nm). The terminal studs might be damaged if excessive torque is
Advertisement
Table of Contents
