Minolta 9000 Service Manual page 87

e @ Mirror box assembling-2
wane @
| Imsce 19 for sssemehng
| Biset at mnmam aperture Fs. 2.
Bow Install fo charge or box.
Aperture control SP SSRN tes ee Sete
base plate @
9011-1625-01 «3
Mirror box
Ben face lad wre of Y base oat song
(Woove, on aety 8:20,
ung
Minimum aperture setting
1) Press charge pin in the direction of arrow
@, hold it.
2) Press roller of gear 1 in the direction of
arrow @Q, engage gear 1 with lever 2
3) Press lever 1 in the directiok of arrow @).
disengage aperture stop gear.
4) Press roller of gear 1 slightly in the
direction of arrow @. Engage first claw of
aperture stop gear with lever 1.
be linimum aperture setting.
'Checking of gear position of minimum aperture
setting.
Marks "=" and "O™ should be positioned as
fig. 2. If not, replace aperture control set (0253).
'After installing mirror box, keep engaging
'until the completion of assembling () on next
page.
MFig. 2. (Minimum aperture setting)