Minolta 9000 Service Manual page 109

AF area adjusting
focus frame
Adjusting procedure
1, Set the instruments as shown,
2
3;
Push [1]
©
is
yy and then
'Augn the corcers of focus
lame sith the comts of
crart
ENT] key of camera 1/0 tester.
Adjust position of sub mirror so that camera 1/O tester shows [1.0=0.1] in LCD.
a
Detach lens. and adjust position of sub mirror
Jifting mirror up with finger.
Release the shutter 2.3 times after adjustment,
and read value of camera [/O tester.
4. After the adjustment, push [RESTART] key of camera 1/0 tester.
MZ checking
~--Checking of CCD image sensor positioning
2
3.
Set the instruments as shown.
Angn the corners of focus
Irame with the poms of
cart,
Push [2 key and then ENT] key of camera 1/0 tester.
If camera 1/0 tester does not show [£400] in LCD, MZ adjusting is required. 'See p. 15.)
33