Minolta 9000 Service Manual page 189

AF and manual focusing failure
Note: Low contrast scanning: Lens moves at @ swoop to © or minimum distance side
(1) Always "D 4" LEDs blink.
(Low contrast scanning in AF mode)
: R Part
Checking item Causes Servicing measures Ean
(0C7DC converter PCB (Vec2
Printed w i r e ) : s o l d e r i n g fail
(2) No focusing, all LEDs "D'O<* not glow
(No AF motor running)
ki Sery measures: Per)
Checking item Causes vieing me een
TC) : defect Poni [Replace B-A (0402)
TG. "detect [Replace tiex PCB.B (0402)
Operation failure in manual focus mode
(1) AF motor runs idle at manual focus mode setting
Part
Checking item Servicing measures sin
16. B-B B-@: short
circuit
IC) "defect _T Replace flex PCB-A (0401)
IC, : defect Replace flex PCB-B (0402)
WOther AF operation failure
(1) Irregular sound during AF operation
Pare
Checking item Causes Seevicing measures me
Motor : defect Replace AF drive set (0260)
(2) By attaching battery holder, AF motor runs
a seis
IC, G-@Bishort iret
ICs :defect Replace flex PCB-B (0402)