Minolta 9000 Service Manual page 130

4, Flexible PC board-B replacing
Flexible PC board-B
HIF not removing SPC holder, skip
'the procedures given in
(T)Remove mirror box assembly.
(Mirror box assembly removing p. 48~51)
& v011-1620-09: «21
=
(BiRemove screw holding flexible PC board-8.
DB sor2-ror0-07/ 2
Continued on next page
1. Set @, © as below in the order.
2. Remove D (x 2).
3. Lifting up mirror. cut off bond of @® with
cutter and remove @.
4, Remove @ (x 2).
+ Do not turn eccentric pin of SPC
holder.
1. Unsolder two lead wires (Red, Black)
2. Remove D (% 2) and unfold flexible PC.
board-B in the direction of (=).
3. Unsolder two lead wires (Green, Orange)
4. Remove @.
S. Remove @ (x 2).