Minolta 9000 Service Manual page 104

33
AE checking
WMeasuring instruments : Luminance source (MODEL L-2101, L-222, L-223)
: EE tester (MODEL EE-2101, EE-2111)
2 Master lens (2072-0001-75)
2 Adjusting back cover (2071-1101-75)
WMiChecking procedure
1. Set the camera and measuring instruments as follows.
Gig. 1
'Luminance source * Camera e Master lens EE tester
K value
21.3
Iso 2100
Focusing ring cK value dial "1.3
Luminance : See Table below,
Exposure mode : See Table below
ASA dial:
100
: AVERAGE,
1 : See Table below
Aperture
Focus mode iM
Shutter speed : See Table below
2, Install adjusting back cover, release the shutter until the counter shows "1".
3. Check AE level following steps below :
Step| Luminance | Metering mode | Shutter speed | Aperture | AE-Allowable range
Ve
' Levs,
EV 10 F365
Levin * F8)
EV 15
3 evs Tes]
a PK | | vr
Teri : | 0+08EV
eva |
EV 15
§ Levin
a1 eaied F 1250
y | evn Ss