Minolta 9000 Service Manual page 187

6. AF /Manual focusing failure
- (Focus indication LED failure only
+See "4. display failure only)
HIAF operation failure (Normal operation in
manual focus mode)
(1) Lens not move at all in AF mode
Checking item Causes Servicing measures
Part
position|
Motor lead wire (Orange/Red,
2 Green) : disconnection ; soldering
tx (GrayGND: short cireuit
deve e188)
Replace flex PCB-A 401)
(2) Lens not move from near side to infinity
Checking item Causes
1Co.9:defect _ Replace flex PCB-B 0402) 5 panini
'ICe GD: soldering failure
1, ©. DD GB: soldering
failure
ICav:defect Replace flex PCB-B (0402)
(3) Lens not move from infinity
Checking item
ICs @: soldering f a i l u r e "
IC, ©, D. WD: soldering