Minolta 9000 Service Manual page 162

15
T Electrical 'Mechanical and
Symptoms Pege | Switches |Lead wires| Eictoree pation
(S7F* blinking stops by releasing finger = ]
from PV switch.
16) No "F* blinking during preview operation. | + Flex PCBA | +Flex PCDA & F
a7 ol contact failure
(1st)
Exposure mode changeover failure
TI) Manual set mark disappear in M mode. 7 Flex PCBA
a Ics
12) ih A mode, exposure control & display ] + Flex PCBA | =Flex POBA & C
function as if in P mode. m ol contact failure.
4 + No isolation sheet
on 0338:
(3) In S mode, exposure control & display ep T Flex PCB-A | + Flex PCB-A & -C
function a8 it in P mode, i | te, contact failure.
TH) la M mode, "F=—" appears, i + Flex PCB-A
7 Icy
5) In S mode, exposure control & display = |
function as if in M mode. |
T5Y In A mode. exposure control & display '
function as if in M mode. :
T7t In S and A modes. exposure control & a T *Fiex POBA
display function as if in M mode. Ic
MiMetering mode changeover failure
IC. VRu
TH) Average metering funetions always. + Flex POB-A
Icy
sl | + Flex PCBB
| Qs
TB) Spot metering funetions in averaxe Z + Flex PCBA
setting. Icy
TB) In spot vmidtone) setting, highlight readings + Flex POBA
function. (Exposure is increased by 8 Ic
pressing AEL. button! | | |
TA) In spot imidtone, setting. shadow readings | | + Flex PCBA
function. (Exposure is decreased by 8 | Is
pressing AEL button. il |
'Average metering funetions ia shadow + Flex POBA
Setting, spot imidtone) metering in 4 Icy |
bighiight setting. |
G] AIL LCDs disappear in spot setting + Flex PCBA |
© Icy
7) 174000 blinks with A ade in spot Setting | 9 + Flex PCBB