8, Main mirror replacing
(Assemble external parts. (P. 11~12)
[Z)Remove mirror box assembly.
(DAttach mirror.
«Paying
'Adjusting
Main mirror
Lifting up mirror-holder slightly with
finger, insert mirror-remover (2071-5806-
75) between mirror and mirror holder.
« Cut off bond, (x 2). (Bayonet side).
« Placing mirror-remover along both sides
(right & left) of mirror holder, cut off
bond (x 2). (Back cover side).
+ Be careful not to remove light shield
sheet.
. Remove bond left on mirror holder, using
cutter knife or the like.
Apply ) B-50 on mirror holder.
(the same positions as before)
tention not to touch with applied
bond, insert to stop position and place on
mirror holder.
Leave the camera for 24 hours. facing
bayonet mount side up.
70