Minolta 9000 Service Manual page 149

Ic.
Electrical Mechanical and
'Symptoms
elements
other causes,
(2) No shutter releasing with normal aperture *Sks * Flex PC!
Ting operation, + Flex PCB-A contact fa
Cy, Ie (SLi)
+ Mirror-up sub:
2B lever's spring:
breakage.
+ Flat for
jirror up lever:
grease shortage.
13) Shutter releases normally first ;no 2nd
shutter releasing.
D LCDs disappear after releasing. Redi— |
(Purple)
® LCDs remain ON alter releasing. al? + Flex PCB-A
Ic
( N o v s l i t shutter (Shutter runs normally but
nosslit shutter) :
Os + LED and illumination LED 8 IRed) SLs Shutter magnet,
light ON normally. 61Yellow: | + Flex PCB-A E-ring off
2B @we. | 1c,
67
reversed
D No illumination LED lighting. 2B + Flex PCB-A
@ Womination LED blinks with selftimer | >, + Flex PCB-A
operation. Ic
D No illumination LED Tighting with sell 55 + Flex PCBA
timer operation. Ke
D Novslit shutter with mirror up by 2B + Flex PCB-A
pressing preview button. Ka
15) Noticeable time-lag from Sw.2 ON to B 2
cseng gE |
(6) 2nd shutter not travel. El [Chit T
WOther releasing failure
fo shutter releasing with remote card. ] [+1 S-a
disconnection.
ca + Remote control
'contact (Rs):
contact failure.
(2) Shutter releases by opening back cover. Py NTI
cnt2
TH Shutter releases by winding simultaneously | 24
& Trouble occurs without batteries +Sis "Mirror-up lever?
mechanical cause :no-slit shutter. jams on mirror
er) stop lever.
* SL: bond on
| magnetic surface.
'D Trouble occurs only at inserting SLs + Flex PCB-A
batteries--electrical cause ;normal ey (Whites
shutter operation.
Ta) Shutter releases by pression AEL button | >, + Flex PCBA