Minolta 9000 Service Manual page 227

{tem 'Checking part Description
Winding Spool should rotate smoothly, Should take up film securely.
-200-300g (Measure the value @) and after. Figure below)
Sprocket should securely advance film.
Should rotate idle with rewind-release button depressed.
Multiple- '© Should enable multiple-exposure without advancing film by operating film-
exposure advance lever with the button held down.
button '@Should advance film securely after canceling multiple-exposure operation.
Rewinding Rewind-release
button
lever.
In lock position ~-----Should not get in the bottom cover.
In unlock position -~--Should not get out from the bottom cover,
Rewind crank Operation: jhould be free from unsmoothness. catching.
Frame counter | Counter dial Advancing:--"Should advance to "I~ when winding twice after closing back
Should advance upto 36+1 without catching, ski
Reseting'-----Should be reset to "S" without catching by opening back cover,
Index----Allowable range is as follows *
= om
BS o-g
Exposure-mode | Operation:---Should rotate smoothiy, without squeak. roughness.
selector
Indication in P| LCD Should display as follows
mode
On a tow] ose | viewfinder
FSS geome
© Each time S-up/-down or A-up/-down lever is depressed, indication of shutter
'speed and aperture should change by 0.5EV respectively (program shift).
When the key is held down, the indication should change continuously.
'© During program shift, viewfinder LED "{B" should blink.
'© Program shift should be canceled after power 10-sec holding.