Minolta 9000 Service Manual page 228

Checking part
Lep
+ ter (E58)
'© Each time S-up/-down lever or A-up/-down lever is depressed, aperture
indication should change by 0.5EV, and shutter-speed indication should change
correspondingly.
'© When the key is held down, the indication should change continuously.
'@ When needed shutter speed is outside the coupled range, shutter-speed
jeation (30, or 4000) should blink.
Indication in S
mode
LeD
'© Should display as follow:
© Each time S-up/dowa, or A-up/-down lever is depressed, shutter-speed
indication should change by 1Ev, and aperture indication should change
correspondingly.
When the key is held down, the indication should change continuously.
© When needed aperture is outside the coupled range, aperture indication
(maximum or minimum (number) should blink,
Indication in M
Leb © Should display as follows :
one { agg.) svntnw (S50 arg)
Ses oad
FSG
metered manual
© Each time S-up/.down lever or A-up/-down lever is depressed, indication of
shutter-speed should change by IE, and aperture should change by 0.5E.
'© When the lever is held down, the indication should change continuously.
1SO setting
Leb
| @ When frame counter shows " 1
follows and then should change to metering indi
with DX-coded film, LCD should display as
jon by touch switch ON.
[With non-DX coded film, previous ISO setting should be displayed)
| © Each time S-up/down lever is depressed with film-speed key held down, ISO
setting should change by 1/3 stop. When the S-up/-down lever is held down,
the indication should change continuously.
© When re-installing battery holder.
(with DX-coded film, the ISO setting should be displayed.
(with non-DX-coded film), the "ISO 100 should blink.