Minolta 9000 Service Manual page 86

15
When replacing flexible PC board-8 set and mirror box, perform MZ adjusting,
. © wasrer ts
Me: Table 1
Adjusting mount o p = SO Collar Washer
T=ty+t2 (mm)
or era
zori-sovt-o1 23 | 9790-2140-40 |
2071-5092-02 29 | 9791-2140-40| OL
= 9799-2140-40 03
nepsting screw fr Pen
Tif needing flexible PC board-B set replacement
Calculate the difference 'Ri hetween correction value printed on previous and new flexible PC boards.
Obtain required adjusting amount T by method of addition or subtraction 1 of R to/from previous
adjusting amount. Then select proper thickness of collar and washer to meet T.
Mit needing mirror box replacement
Calculate the difference R» between correction values of previous mirror box #2) and new mirror
box
21, Obtain required adjusting amount by method of addition or subtraction | 1 of R to/from
e
previous adjusting amount.
Then select proper thickness of cullar and washer to meet required adjusting amount.
Milf needing flexible PC board-8 set and mirror box replacement
Add correction values of flexible PC buard-B set and mirror box (32) if "—" 'minus sign) is given
'on correction value of mirror box. subtract the printed value 'absolute value' from correction value of
flexible PC board-B set t obtain required adjusting amount.
Then select proper thickness of collar and washer ts meet required adjusting amount.
#1: Correction value of previous PC board new PC hoards
Correction value of previous UC board new PC board's:
#2 1 Value subtracted correction value of previous flexible PC board-B set from previous adjusting
amount Ts.
Fig. 2
& correction vate of Consider number of second decimal place as S( 5) regarcless
fienbie PC Beare set Eperdlgsant