Minolta DiMAGE X Instruction Manual
  1. Manuals
  2. Brands
  3. Minolta Manuals
  4. Digital Camera
  5. DiMAGE image Viewer Utility
  6. Instruction manual

Minolta DiMAGE X Instruction Manual

Konica minolta owners manual digital camera dimage x
Hide thumbs Also See for DiMAGE X:
Table of Contents

Advertisement

Quick Links

9224-2776-11 H-A112
E

INSTRUCTION MANUAL

Advertisement

Table of Contents
loading

Related Manuals for Minolta DiMAGE X

Summary of Contents for Minolta DiMAGE X

  • Page 1: Instruction Manual

    9224-2776-11 H-A112 INSTRUCTION MANUAL...
  • Page 2 Thank you for purchasing this Minolta product. Please take the time to read through this instruction manual so you can enjoy all the features of your new digital camera. This manual contains information regarding products introduced before February, 2002. To obtain compatibility information for products released after this date, contact a Minolta Service Facility listed on the back cover of this manual.
  • Page 3 OR PROPER AND SAFE USE NP-200 Lithium-ion batteries The DiMAGE X operates on a small, but powerful lithium-ion battery. Misuse or abuse of the lithium- ion battery can cause damage or injury through fire, electric shock, or chemical leakage. Read and understand all warnings before using the battery.
  • Page 4 -20° and 30°C (-4° and 86°F) and a humidity of 45% to 85% RH. General warnings and cautions for product use. Read and understand the following warnings and cautions for safe use of the digital camera and its accessories.
  • Page 5 • Do not use the monitor while operating a vehicle or walking. It may result in injury or an accident. • Do not use this product in a humid environment, or operate these products with wet hands. If liquid enters this product, immediately remove the battery or unplug the power cord, and discontinue use. The continued use of a product exposed to liquids may cause damage or injury through fire or elec- tric shock.
  • Page 6 OR PROPER AND SAFE USE CAUTION • Do not use or store these product in a hot or humid environment such as the glove compartment or trunk of a car. It may damage the camera, charger, and battery which may result in burns or injuries caused by heat, fire, explosion, or leaking battery fluid.

  • Page 7: Table Of Contents

    ABLE OF CONTENTS ABOUT THIS MANUAL The getting up and running section covers how to prepare the camera for use. It contains important information about power supplies and memory cards. The basic operation of this camera is covered in the recording-mode section between pages 20 and 29, and the playback-mode section between pages 50 and 56.
  • Page 8 ABLE OF CONTENTS Focus signals...25 Special focusing situations ...25 Flash modes ...26 Flash range...27 Flash signals...27 Navigating the recording-mode menu ...28 Drive modes ...30 Single-frame advance ...30 Continuous advance ...31 Self-timer...32 Movie recording ...33 Audio recording...34 Image size ...35 Image quality ...36 The frame counter and memory card capacity...37 White balance...38 Automatic white balance...38...
  • Page 9 Formatting memory cards...62 Video output ...62 Language...62 Viewing images on a television ...63 Data-transfer mode ...64 DiMAGE X system requirements...64 Connecting the camera to a computer ...65 Connecting to Windows 98 and 98SE...67 Automatic installation ...67 Manual installation ...68 Connecting to Mac OS 8.6 ...70 QuickTime system requirements ...70...

  • Page 10: Names Of Parts

    AMES OF PARTS * This camera is a sophisticated optical instrument. Care should be taken to keep these surfaces clean. Please read the care and storage instructions in the back of this manual (p. 82). Shutter-release button DC terminal (p. 15) Strap eyelet (p.
  • Page 11 Viewfinder* Indicator lamp (p. 81) Left key Right key Zoom lever (p. 21) Mode switch Recording mode (p. 20) Playback mode (p. 50) LCD monitor* Speaker Enter button Menu button Flash-mode button (p. 26) Display button (p. 48, 52) AV-out-terminal/USB-port cover...

  • Page 12: Getting Up And Running

    ETTING UP AND RUNNING GETTING UP AND RUNNING This section covers how to prepare your camera for use. Details on the use and installation of the battery and memory card are given as well as how to attach the hand strap and optional AC adapter. Charging the lithium-ion battery Before the camera can be used, the lithium-ion battery must be charged.

  • Page 13: Changing The Lithium-Ion Battery

    Changing the lithium-ion battery This digital camera uses one NP-200 lithium-ion battery. Before using the battery, read the safety warnings on pages 3 and 4 of this manual. When replacing the battery, the camera should be turned off. Slide the battery-chamber door toward the bottom of the camera to release the safety catch (1).

  • Page 14: Battery-Condition Indicator

    ETTING UP AND RUNNING Battery-condition indicator This camera is equipped with an automatic battery-condition indicator displayed on the LCD monitor. The icon will change from white to red when battery power is low. Full-battery icon - the battery is fully charged. This icon is displayed for three seconds when the camera is switched on or switched between the recording or playback mode.

  • Page 15: Ac Adapter (Sold Separately)

    AC adapter (sold separately) Do not change the power supply while the camera is on. Always turn off the camera before changing between power supplies. The AC adapter AC-4 or AC-5 allows the camera to be powered from a household outlet. The AC adapter is recommended when the camera is interfaced with a computer or during periods of heavy use.

  • Page 16: Installing And Removing A Memory Card

    ETTING UP AND RUNNING Installing and removing a memory card Always turn off the camera and confirm the indicator lamp is not orange and blinking before changing the memory card, otherwise the card may be damaged, and data lost. An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.

  • Page 17: About Memory Cards

    About memory cards The response time during recording and playback is longer with MultiMediaCards compared with SD Memory Cards. This is not a defect, but rather due to the specifications of the cards. When using large capacity cards, some operations like deletion may take longer. The SD Memory Card has a write-protect switch to prevent image data from being deleted.

  • Page 18: Setting The Date And Time

    ETTING UP AND RUNNING Setting the date and time After initially inserting a memory card and charging the battery, the camera’s clock and calendar must be set. When images are recorded, the image data is saved with the date and time of record- ing.
  • Page 19 Basic Setup 1 Setup 2 LCD brightness Power off 3 min. Audio signals Date/Time set Date format YYYY/MM/DD Playback menu: setup 1 section Date/Time set Enter Date/Time setting screen Press the menu button to activate the play- back menu. Use the right key to highlight the setup 1 tab at the top of the menu.

  • Page 20: Recording Mode

    ECORDING MODE RECORDING MODE This section covers the basic recording operation as well as advanced recording functions. To start using the camera, read pages 20 through 29. Many of the recording functions are controlled with menus. The menu navigation sections concisely describe how to change menu settings. Descriptions of the settings immediately follow the navigation section.

  • Page 21: Using The Zoom Lens

    Using the zoom lens This camera is equipped with a unique 5.7 - 17.1mm zoom lens. This is equivalent to a 37 to 111mm lens on a 35mm camera. The lens is controlled by the zoom lever at the back of the camera. In 35mm photography, focal lengths below 50mm are referred to as wide-angle;...

  • Page 22: Lcd Monitor Display - Recording Mode

    ECORDING MODE LCD monitor display - recording mode Microphone indicator Recording mode Flash modes (p. 26) Exposure compensation (p. 46) White balance (p. 38) The frame counter cannot exceed 999. When the number of recordable images exceeds this, 999 will be displayed. The frame counter will continue to count down when the number of recordable images falls below one thousand.

  • Page 23: Basic Recording Operation

    Basic recording operation Turn the camera on and slide the mode switch to the recording position. Press the shutter-release button partway down (1) to lock the focus and exposure. • The focus signals (p. 25) on the monitor and the indicator lamp next Press the shutter-release button all the way down (2) to take the pic- ture.

  • Page 24: Focus Lock

    ECORDING MODE Focus lock The focus-lock function is used when you want to compose the image with the subject off-center and outside the focus frame. Focus lock may also be used when a special focusing situation prevents the camera from focusing on the subject. This function is controlled with the shutter-release button. Focus range The focus range is 25cm (0.8ft.) to infinity.

  • Page 25: Focus Signals

    Focus signals This digital camera has a quick, accurate autofocusing system. The focus icon in the lower right cor- ner of the LCD monitor and the indicator lamp next to the viewfinder indicate the focus status. The shutter can be released regardless of whether the camera can focus on the subject or not.

  • Page 26: Flash Modes

    ECORDING MODE Flash modes The flash can be used when taking still images. To set the flash mode, simply press the flash mode button (1) on the back of the cam- era until the desired mode is displayed. The active flash mode is dis- played in the top left corner of the LCD monitor.

  • Page 27: Flash Range

    Flash cancel - the flash will not fire. Use flash cancel when flash photography is prohibited, natural light is desired to illuminate the subject, or the subject is beyond the flash range. The camera-shake warning may appear when flash cancel is selected (p. 22). Night portrait - for flash portraits at night.

  • Page 28: Navigating The Recording-Mode Menu

    ECORDING MODE Navigating the recording-mode menu Camera operations and recording functions are controlled on the menu. Navigating the menu is simple. The menu button turns the menu on and off. The zoom lever and left and right keys control the cursor and change settings on the menu. The enter button selects menu options and sets adjustments.
  • Page 29 Basic Drive mode Image size 1600 X 1200 1280 X 960 640 X 480 Quality Super fine Fine Standard Economy White balance Auto Refer to the following sections for details on the menu options and their settings. The setup 1 section can be accessed from both the recording-mode and playback menu (p.

  • Page 30: Drive Modes

    ECORDING MODE Drive modes The drive modes control the rate and method images are captured. Icons indicating the selected drive mode appear on the monitor. The drive mode is selected in the basic section of the recording- mode menu (p. 28). When the camera is turned off, the drive mode is reset to single-frame advance. Movie recording (p.

  • Page 31: Continuous Advance

    Continuous advance The continuous-advance drive mode allows a series of images to be captured while holding down the shutter-release button. The number of images that can be captured at one time and the rate of capture depend on the image-quality and image-size setting. With the image-size setting of 1600 X 1200, the maximum rate of capture is 2 fps.

  • Page 32: Self-Timer

    ECORDING MODE Self-timer Used for self-portraits, the self-timer will delay the release of the shutter for approxi- mately ten seconds after the shutter-release button is pressed. The self-timer drive mode is selected in the basic section of the recording-mode menu (p. 28). With the camera on a tripod, compose the picture as described in the basic recording operation section (p.

  • Page 33: Movie Recording

    Movie recording The movie-recording drive mode is selected in the basic section of the recording-mode menu (p. 28). Movie clips up to approximately thirty-five seconds in length with audio can be recorded. The movie image is 320 X 240 pixels (QVGA) and recorded at a rate of around 340KB/s.

  • Page 34: Audio Recording

    ECORDING MODE Audio recording Ninety seconds of audio can be recorded without an image. The audio-recording drive mode is selected in the basic section of the recording-mode menu (p. 28). When the function is active, the live view is replaced with a blue screen. Approximately 842 seconds of audio can be stored on one 8MB memory card.

  • Page 35: Image Size

    Image size If the image size is changed, the frame counter will display the approximate number of images that can be recorded at that setting on the installed memory card. One memory card can contain images with differing sizes. Changing image size affects the number of pixels in each image.

  • Page 36: Image Quality

    ECORDING MODE Image quality This camera has four image-quality settings: super fine, fine, standard, and economy. Always select the desired setting before taking the picture. Image quality is set in the basic section of the recording- mode menu (p. 28). Image quality controls the rate of compression, but has no effect on the number of pixels in the image.

  • Page 37: The Frame Counter And Memory Card Capacity

    The frame counter and memory card capacity The number of images that can be stored on a memory card is determined by the size and type of card and the file size of the images. The actual file size is determined by the scene;...

  • Page 38: White Balance

    ECORDING MODE White balance White balance is the camera’s ability to make different types of lighting appear neutral. The effect is similar to selecting daylight or tungsten film, or using color compensating filters in conventional pho- tography. One automatic and four preset white-balance setting are avail- able.

  • Page 39: Preset White Balance

    Preset white balance Preset white-balance settings must be set before the image is taken. Once set, the effect is immedi- ately visible on the monitor. To record the ambient light, set the flash mode to flash cancel (p. 26). The built-in flash can be used with preset white-balance, but will create a pinkish or blueish cast with the fluorescent and tungsten settings.

  • Page 40: Digital Zoom

    ECORDING MODE Digital zoom Assisting the optical zoom is a four-step 2X digital zoom. The digital zoom is activated in the custom section of the recording-mode menu (p. 28). The digital zoom increases the magnification of the greatest telephoto setting of the optical zoom in four steps: X1.25, X1.50, X1.75, and X2.00.

  • Page 41: Instant Playback

    Instant playback After a still image is captured, it can be displayed on the monitor for two seconds before being saved. Instant playback shows the last frame in the series when used with the continuous-advance drive mode (p. 31). When the LCD monitor is turned off (p.

  • Page 42: Voice Memo

    ECORDING MODE Voice memo Voice memo allows an audio track up to fifteen seconds to be recorded with a still image. The function is activated in the custom section of the recording-mode menu (p. 28). When the function is active, the white microphone icon is displayed on the LCD monitor. The voice memo must be set before taking a picture.

  • Page 43: Folder Name

    The next three letters refer to Minolta, and the last two numbers indicate the camera used; 09 indicates a DiMAGE X. A date folder name also starts with the three digit serial number and is followed by one register for the year, two registers for the month, and two registers for the day: 100YMMDD.

  • Page 44: Lcd Brightness

    ECORDING MODE LCD brightness High The brightness of the LCD monitor can be set in eleven levels. After selecting the LCD brightness option and pressing the enter button on the menu (p. 28, 54), the LCD brightness screen will be displayed. Pressing and holding the display button will also active the LCD brightness screen.

  • Page 45: Setting The Date And Time

    Setting the date and time It is important to accurately set the clock. When a recording is made, the date and time of the recording are saved with the file and are displayed in playback mode or with the DiMAGE Image Viewer Utility software included on the CD-ROM.

  • Page 46: Exposure Compensation

    ECORDING MODE Exposure compensation The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±2Ev in 1/3 increments. The exposure-compensation value will remain in effect until it has been reset or the camera has been turned off. The exposure compensation must be set before the image is captured.

  • Page 47: What Is An Ev

    Sometimes the camera’s exposure meter is deceived by certain subjects. Exposure compensation can be used in these situations. For example, a very bright scene, such as a snowy landscape or a white sandy beach, can appear too dark in the captured image. Before taking the picture, adjusting the exposure by +1 or +2 Ev will result in an image with normal tonal values.

  • Page 48: Display Button - Recording Mode

    ECORDING MODE Display button - recording mode The display-information button controls the LCD monitor display. The display cycles to the next position each time the button is pressed: full display, live image only, and monitor off. If the display button is pressed and held, the LCD-brightness adjustment screen will appear, see page 44. Battery power can be conserved by turning the monitor off and using the viewfinder to take pictures.

  • Page 49: A Short Guide To Photography

    A short guide to photography Photography can be a rewarding pursuit. This guide is an introduction to some basic photographic principles. The zoom lens does not only affect how large the subject is in the picture, but it also influences the depth of field and perspective.

  • Page 50: Playback Mode

    LAYBACK MODE PLAYBACK MODE This section details how to view and edit images on the camera. Basic operation of the playback mode is covered from page 50 to 56. Detailed descriptions of the playback menu settings follow the menu navigation section. Single-frame playback display Mode indicator Still image...

  • Page 51: Viewing Images And Playing Back Audio Recordings

    Viewing images and playing back audio recordings A note icon at the bottom of the monitor indicates the image has an audio track. To play back the audio track, press the enter button (3). • To cancel a voice memo or audio caption, press the menu button.

  • Page 52: Display Button - Playback Mode

    LAYBACK MODE Display button - playback mode The display button controls the display format. Each time the button is pressed, the display cycles through to the next format: full display, image only, index playback. Full display Display button Image only Index playback In index playback, the left and right keys, and zoom lever moves the yellow border around the index thumbnails.

  • Page 53: Enlarged Playback

    Enlarged playback In single-frame playback, a still image can be enlarged in six steps for closer examination: 1.5X, 2.0X, 2..5X, 3.0X, 3.5X, and 4.0X. With the image to be magnified displayed, press the zoom lever up to activate the enlarged playback mode. •...

  • Page 54: Navigating The Playback-Mode Menu

    LAYBACK MODE Navigating the playback-mode menu In playback mode, simply press the menu button to activate the menu. The menu is used to edit images and control camera operations. Activate the playback-mode menu with the menu button. The “Basic” tab at the top of the menu will be highlighted. Use the left/right keys to highlight the appropriate menu tab;...
  • Page 55 Basic Audio caption Enter Delete This frame All frames Marked frames Lock This frame All frames Marked frames Unlock frames Print This frame All frames Marked frames Cancel all Index print Yes / No Setup 2 Format Enter Video output NTSC Language Japanese...

  • Page 56: Frame-Selection Screen

    LAYBACK MODE Frame-selection screen When a marked-frames setting is chosen on the menu, the frame selection screen will appear. This screen allows multiple image and audio files to be chosen. The left and right keys move the yellow border to select the frame.

  • Page 57: Audio Captioning

    Audio captioning A still image can have a fifteen-second audio caption attached to it. This function will also replace a voice-memo audio track recorded with an image. Audio captions cannot be attached to movie clips, nor can they over rewrite audio recordings. Display the image to which the audio caption will be attached.

  • Page 58: Deleting Image And Audio Files

    LAYBACK MODE Deleting image and audio files Deleting permanently erases the image or audio file. Once deleted, a file cannot be recovered. Care should be taken when deleting files. Single, multiple, or all image or audio files on the memory card can be deleted with the playback-mode menu.

  • Page 59: Locking Image And Audio Files

    Locking image and audio files Single, multiple, or all image or audio files on the memory card can be locked. A locked file cannot be erased by a playback menu delete function. Important images should be locked. The lock option has four settings: This frame - The frame displayed or highlighted in playback mode will be locked.

  • Page 60: About Dpof

    LAYBACK MODE About DPOF This camera is supported by DPOF version 1.1. DPOF (Digital Print Order Format) allows direct printing of still images from digital cameras. After the DPOF file is created, the memory card is simply taken to a photofinishing service or inserted into the card slot of DPOF compatible printers. When a DPOF file is created, a misc.

  • Page 61: Ordering An Index Print

    When the this-frame or all-frames setting is chosen, a screen will appear requesting the number of copies of each image; a maximum of nine copies can be ordered. Use the zoom lever to set the number of copies desired. If the all-frames setting was used to create a print order, any additional images saved afterwards on the memory card will not be included in the order.

  • Page 62: Formatting Memory Cards

    LAYBACK MODE Formatting memory cards When a memory card is formatted, all data on the card is erased. The formatting function is used to erase all data on a memory card. Before formatting a card, copy the data to a computer or storage device. Locking images will not protect them from being deleted when the card is formatted.

  • Page 63: Viewing Images On A Television

    Viewing images on a television It is possible to view camera images on your television. The camera has a AV-out terminal to make the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL standards. The video-output setting can be checked and set in the setup 2 section of the playback menu (p.

  • Page 64: Data-Transfer Mode

    Windows 98 driver software must repeat the installation procedure. The updated version of the driver software included on the supplied DiMAGE software CD-ROM is required for the operation of the DiMAGE X with a computer. The new software will have no affect on the performance of the DiMAGE 7, 5, S304, or 2330.

  • Page 65: Connecting The Camera To A Computer

    Connecting the camera to a computer A fully charged battery should be used when the camera is connected to a computer. The use of the AC adapter (sold separately) is recommended over the use of the battery. For users with Windows 98, 98SE, or Mac OS 8.6, read the respective sections on how to install the necessary USB driver before connecting the camera to a computer (Windows 98 - p.
  • Page 66 TRANSFER MODE Turn on the camera to initiate the USB connection. • While the camera is connected to a computer, the data- transfer screen will be displayed. When the camera is properly connected, a drive icon will appear on the computer. When using Windows XP, the removable-disk window will be displayed.

  • Page 67: Connecting To Windows 98 And 98Se

    Connecting to Windows 98 and 98SE The driver needs only to be installed once. If the driver cannot be installed automatically, it can be installed manually with the operating system’s add-new-hardware wizard; see the instructions on the following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the accompanying instructions on the screen.

  • Page 68: Manual Installation

    TRANSFER MODE Manual installation To install the Windows 98 driver manually, follow the instructions in the connecting-the-camera-to-a- computer section on page 65. When the camera is plugged into the computer, the operating system will detect the new device and the add-new-hardware-wizard window will open.
  • Page 69 The last window will confirm the driver has been installed. Click “Finish” to close the add new hardware wizard. Restart the computer. The add new hardware wizard will confirm the location of the driver. Click “Next” to install the driver in the system. •...

  • Page 70: Connecting To Mac Os 8.6

    TRANSFER MODE Connecting to Mac OS 8.6 To access this camera with a computer with Mac OS 8.6, the USB storage support 1.3.5.smi must be installed first. This software is supplied by Apple Computer, Inc. free of charge. It can be downloaded from the Apple web site at http://www.apple.com.

  • Page 71: Changing The Memory Card - Data-Transfer Mode

    Changing the memory card - data-transfer mode Care should be taken when changing memory cards while the camera is attached to a computer. Data could be lost or damaged if the camera is not disconnected properly. Windows 98 and 98SE 1.

  • Page 72: Memory Card Folder Organization

    TRANSFER MODE Memory card folder organization Once the camera is connected to the computer, image and audio files can be accessed by double clicking on icons. To copy images and audio recordings, simply drag and drop the file icon into a location in the computer.
  • Page 73 Files and folders on the memory card can be deleted using the computer. Do not change the name of a file on the card or add a date to the card with a computer. Never format the memory card from the computer;...

  • Page 74: Disconnecting The Camera From The Computer

    TRANSFER MODE Disconnecting the camera from a computer The camera cannot be turned off until the USB cable is disconnected. Windows 98 and 98SE Confirm the indicator lamp is not lit. Disconnect the USB cable and then turn off the camera. Windows Me, 2000 professional, and XP To disconnect the camera, left click on the unplug-or-eject-hardware icon located on the task bar.

  • Page 75: Macintosh

    Macintosh Confirm the indicator lamp is not lit and then drag the mass-storage device icon and drop it into the trash. Disconnect the USB cable and turn off the camera. • If the USB cable is disconnected before performing the first step, an alert message will appear. Always complete the first step before disconnecting the USB cable.

  • Page 76: Appendix

    ETTING THE MENU LANGUAGE Basic Setup 1 Setup 2 Format Video output NTSC Language English Playback menu: setup 2 section Setting the menu language The menu language is set on the setup 2 section of the playback menu. Turn the camera on by pressing the main switch near the shutter-release button (1).

  • Page 77: Troubleshooting

    ROUBLESHOOTING This section covers minor problems with basic camera operation. For major problems or damage, or if a problem continues to reoccur frequently, contact a Minolta service facility listed on the back cover of this manual. Problem Symptom Nothing dis- The camera played on the will not work.
  • Page 78 ROUBLESHOOTING Problem Symptom Focus signal is red and the viewfinder indicator lamp is green and blinking quick- Pictures are not sharp. Pictures are taken indoors or in low-light situations with- out flash. Only one pic- ture can be taken with The image quality is set to super fine.
  • Page 79 Problem Symptom Subject Viewfinder was used for framing. Parallax appears too is apparent with subjects closer than 1m far to the right (3ft.) at the zooms’ wide-angle position or in the image. 3m (10ft) at the telephoto position. Part of the Viewfinder image area is was used to...
  • Page 80 ROUBLESHOOTING The indicator lamp next to the viewfinder can be used to diagnose camera operations. The lamp colors change between green, red, and orange, and the lamp can glow steadily or blink at two rates. Color State Steady Blinking slowly Green Blinking quickly...
  • Page 81 Removing the driver software – Windows 1. Insert a memory card in the camera and connect it to the computer with the USB cable. Other devices must not be connected to the computer during this procedure. 2. Right click on the My-computer icon. Select “properties” from the drop-down menu. Windows XP: from the start menu go to the control panel.

  • Page 82: Care And Storage

    ARE AND STORAGE Camera care • Do not subject the camera to shock or impact. • Turn off the camera when transporting. • This camera is neither waterproof nor splashproof. Inserting or removing the battery or memory card, or operating the camera with wet hands may damage the camera. •...
  • Page 83 Batteries • Battery performance decreases with temperature. In cold environments, we recommend keeping spare batteries in a warm place, such as the inside of a coat. Batteries can recover their power when they warm up. • Do not store the battery when it is fully charged. •...

  • Page 84: Lcd Monitor Care

    ARE AND STORAGE LCD monitor care • Although the LCD monitor is manufactured using high precision technology, there may occasionally be a lack of color or bright points on the LCD monitor. • Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged. •...
  • Page 85 Conformité Européenne (European Conformity). This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Digital Camera: Tested To Comply With FCC Standards FOR HOME OR OFFICE USE to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

  • Page 86: Technical Specifications

    ECHNICAL SPECIFICATIONS Number of effective pixels: CCD: Camera sensitivity (ISO): Aspect ratio: Lens construction: Maximum aperture: Focal length: Focusing range: Autofocusing system: Shutter: Shutter speeds: Built-in flash recycling time: Viewfinder: Monitor LCD: Monitor field of view: A/D conversion: Recording media: File formats: Print Image Matching: Menu languages:...
  • Page 87 Battery performance (recording): Battery performance (playback): External power source: Dimensions: Weight: Operating temperature: Operating humidity: Lithium-ion battery NP-200 Voltage: Weight: Dimensions Battery charger BC-200 Input voltage: Weight: Dimensions Specifications are based on the latest information available at the time of printing and are subject to change without notice.
  • Page 88 ©2001 Minolta Co., Ltd. under the Berne Convention and the Universal Copyright Convention. Printed in Japan...

Table of Contents