Setting The Parameters - DURKOPP ADLER M-TYPE DELTA D887 Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D887 - 00.0 - 10/2022
Default status bar settings
Fig. 61: Default status bar
Material thickness
Seam Length
Stitch count
5.6.2

Setting the parameters

In Manual mode, you can set a variety of parameters. The functions
and how they affect the parameters are described further below.
To access the parameter settings:
1. Press the symbol
 This opens the parameter settings interface.
Revolution Speed
Current
Position Handwheel
to bring up the parameter pane.
Spare
87