Table of Contents
Advertisement
Operation
Operating Instructions D887 - 00.0 - 10/2022
4.14 Controlling the trimmer
4.14.1 Switching the trimmer on and off
Fig. 31: Switching on and off
(1) - Button
(2) - Upper knife carrier
Switching on
1.
Press the button (1) on the control panel.
The upper knife carrier (2) is moved to the lower cutting
position along with the cutting knife (3).
Information
When set to the default settings, the drive parameters will not
cause the motor-driven knife to oscillate unless the pedal is
pressed to start the machine (can be changed).
Switch Off
1.
Press the button (1) on the control panel again.
①
②
③
(3) - Knife
53
Advertisement
Table of Contents
