Table of Contents
Advertisement
Setup
Operating Instructions D887 - 00.0 - 10/2022
To adjust the working height:
1.
Loosen the screws (1) on the stand bars.
2.
Adjust the tabletop to the desired height.
Important
Pull out or push in the tabletop evenly at both sides to prevent it
from jamming.
3.
Tighten the screws (1) on the stand bars.
7.7
Assembling the control
Fig. 81: Assembling the control
①
(1) - Strain relief mechanism
(2) - Control
To assemble the control:
1.
Use three screws (3) to screw the control box (2) in place
under the tabletop.
2.
Clamp the power cable of the control (2) into the strain relief
mechanism (1).
3.
Screw the strain relief mechanism (1) under the tabletop.
(3) - Drill holes for screws
③
②
161
Advertisement
Table of Contents
