Authorizations As Default Technician - DURKOPP ADLER M-TYPE DELTA D887 Operating Instructions Manual

Programming Commander DELTA
Operating Instructions D887 - 00.0 - 10/2022
5.4.1

Authorizations as Default Technician

The factory setting for the Default Technician requires that the tech-
nician enter their username and password (technician, 25483) to log
in. If selecting User Management as a Default Technician ( p. 68),
you will be presented with the following interface:
Fig. 50: Authorizations as Default Technician
①
(1) - Tab for roles and users
(2) - List of roles/users
On the left-hand side, you can select between the tabs (1) reserved
for roles ( p. 72) and users ( p. 76). Detailed explanations
are provided further below. To the right of the tabs you will find
the list (2) of created roles / users - varying with the tab (1) you
selected. On the far right, you will find the settings (3) associated
with the role/user you selected.
Explanation of role and user
Roles
A role defines which authorizations
are permitted or forbidden.
It is possible to assign more than
one role to a single user.
You need to be a user to log in; you
cannot log in using a role.
②
(3) - Specify roles/users
User
You can log in as a user.
A user can be assigned one or
several roles - this is how they
receive their authorizations.
③
71