Bringing The Machine Head To A Vertical Position - DURKOPP ADLER M-TYPE DELTA D887 Operating Instructions Manual

164
7.9 Bringing the machine head to a vertical
position
WARNING
Risk of injury from moving parts!
The machine head is very heavy. Risk of crushing
injuries.
Ensure that your hands are not jammed when
inserting the machine head.
Fig. 84: Bringing the machine head to a vertical position
①
(1) - Lever
To raise the machine head to a vertical position:
1. Press the lever (1) in the direction of the arrow.
 This deactivates the folding mechanism.
2. Fold the machine into the tabletop.
Operating Instructions D887 - 00.0 - 10/2022
Setup