Table of Contents
Advertisement
Programming Commander DELTA
5.3.6
Setting the screen configuration
The screen configuration is used for the display of the tiles in
Manual mode.
The setting is explained at the appropriate place in the chapter
on Manual mode ( p. 84).
5.4
User Management
The User Management section allows you to create users and
roles with different authorizations.
The setting is such that the Default User will automatically be logged
in when the machine starts. You can change this setting at the
Technician level as needed.
The following is an explanation of the user Default Technician,
which is the default user. You can, of course, set up any number
of users and roles that meet your individual requirements.
Requirement for User Management administration: You have to
be logged in as the Default Technician.
To log in as the Default Technician:
1.
Press the symbol
to bring up the navigation pane.
This opens the navigation interface.
Fig. 46: User Management (1)
①
(1) - Logout
68
Operating Instructions D887 - 00.0 - 10/2022
Advertisement
Table of Contents
