Power Input Board Module Replacement - Lenovo ThinkEdge SE350 V2 User Manual

Hide thumbs Also See for ThinkEdge SE350 V2:
Table of Contents

Advertisement

• Install a drive cage (see
• Proceed to complete the parts replacement (see
 
Demo video
https://www.youtube.com/watch?v=6H3mBi8JTgA
 

Power input board module replacement

Follow instructions in this section to remove or install a power input board (PIB) module.
Remove the power input board module
Follow instructions in this section to remove the power input board module.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read
"Installation Guidelines" on page 37
you work safely.
• Remove the shipping bracket, if applicable (see
server and disconnect the power cords (see
• Remove the node from the enclosure , if applicable (see
lay the node on a flat, static-protective surface.
Procedure
Step 1.
Make preparations for this task.
a.
If applicable, unlock or remove any locking device that secures the top cover, such as a
Kensington lock; then, remove the top cover (see
b.
Disconnect all the drive cables from the system board; then, remove the drive cage from the
node (see
c.
Remove the power module board and disconnect the cables between the power module board
and power input board module (see
"Cable routing for the power module board and power input board module" on page
ThinkEdge SE350 V2 User Guide
118
"Install a drive cage" on page
and
"Power off the server" on page
"Remove the drive cage" on page
86).
"Complete the parts replacement" on page
"Safety inspection checklist" on page 38
"Configuration guide" on page
"Configuration guide" on page
"Remove the top cover" on page
80).
"Remove the power module board" on page 122
161).
to make sure that
45); then, power off the
44).
45); then, carefully
158).
and
172).

Advertisement

Table of Contents
loading

This manual is also suitable for:

7da97dbk

Table of Contents