Step 2.
Align the front I/O bezel with its slot on the front of the node; then, insert the front I/O bezel into
place.
Figure 115. Installation of the front I/O bezel
Step 3.
Tighten the five screws that secure the front I/O bezel.
Figure 116. Installation of the front I/O bezel screws
After this task is completed
• Proceed to complete the parts replacement (see
Demo video
https://www.youtube.com/watch?v=uC3SFsq4HiM
Update the Vital Product Data (VPD)
Use this topic to update the Vital Product Data (VPD).
• (Required) Machine type
• (Required) Serial number
"Complete the parts replacement" on page
.
Chapter 5
Hardware replacement procedures
161).
153