Lenovo ThinkEdge SE350 V2 User Manual page 102

To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read "Installation Guidelines" on page 37
you work safely.
• Remove the shipping bracket, if applicable (see
server and disconnect the power cords (see
• Remove the node from the enclosure , if applicable (see
lay the node on a flat, static-protective surface.
Procedure
Step 1. Make preparations for this task.
a. If applicable, unlock or remove any locking device that secures the top cover, such as a
Kensington lock; then, remove the top cover (see
b. Disconnect the cable from the front operator assembly (see
operator assembly" on page
Step 2. Remove the three screws that secure the front operator assembly to the node.
Step 3. Disengage and remove the front operator assembly from its slot.
Figure 66. Removal of the front operator assembly
After this task is completed
• Install a replacement unit (see
• If you are instructed to return the component, follow all of the packaging instructions and use any
packaging materials for shipping that are supplied to you.
Demo video
https://www.youtube.com/watch?v=okPLbdDgflo
ThinkEdge SE350 V2 User Guide
94
and "Safety inspection checklist" on page 38
"Configuration guide" on page
"Power off the server" on page
170).
"Install a front operator assembly" on page
45); then, power off the
44).
"Configuration guide" on page
"Remove the top cover" on page
"Cable routing for the front
95).
to make sure that
45); then, carefully
158).