Lenovo ThinkEdge SE350 V2 User Manual page 110

• If you are instructed to return the component, follow all of the packaging instructions and use any
packaging materials for shipping that are supplied to you.
Demo video
https://www.youtube.com/watch?v=JRs-9OXIdRY
Install a keylock switch with cable
Follow instructions in this section to install a keylock switch with cable.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read "Installation Guidelines" on page 37
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node; then, remove it from the package and place it on a static-protective surface.
Procedure
Step 1. Make preparations for this task.
a. If necessary, install the keylock switch cable to the bracket.
1. Insert the keylock switch with cable into the bracket until it clicks into place.
ThinkEdge SE350 V2 User Guide
102
and "Safety inspection checklist" on page 38 to make sure that