Lenovo ThinkEdge SE350 V2 User Manual page 168

Demo video
https://www.youtube.com/watch?v=THcuXEVJEUQ
Install the top cover
Follow instructions in this section to install the top cover.
About this task
To avoid potential danger, make sure to read and follow the safety information.
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read "Installation Guidelines" on page 37
you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
node; then, remove it from the package and place it on a static-protective surface.
• Make sure that all components and cables are installed and seated correctly inside the node, except for
the power cords and external cables, and that no loose tools or parts are left inside the node.
Procedure
Step 1. Make preparations for this task.
a. Carefully lay the node on a flat, static-protective surface.
Step 2. Install the top cover.
a. Align the posts inside the top cover with the slots on the node; then, slide the top cover
towards the front of the node until it clicks into place.
b. Tighten the screw on the side to secure the top cover to the node.
ThinkEdge SE350 V2 User Guide
160
and "Safety inspection checklist" on page 38 to make sure that