Lenovo ThinkEdge SE350 V2 User Manual page 143

Step 1. Make preparations for this task.
a. If applicable, unlock or remove any locking device that secures the top cover, such as a
Kensington lock; then, remove the top cover (see
b. Disconnect all the drive cables from the system board; then, remove the drive cage from the
node (see
c. Remove the drive cage (see
d. Remove the front operator assembly from the node and disconnect the cable from the system
board(see
Step 2. Remove the five screws that secure the front I/O bezel.
Figure 98. Removal of the front I/O bezel screws
Step 3. Remove the front I/O bezel by pulling it away from the node.
Figure 99. Removal of the front I/O bezel
After this task is completed
• Install a replacement unit (see
• If you are instructed to return the component, follow all of the packaging instructions and use any
packaging materials for shipping that are supplied to you.
Demo video
"Remove the drive cage" on page
"Remove the drive cage" on page
"Remove the front operator assembly" on page
"Install a front I/O bezel" on page
"Remove the top cover" on page
80).
80).
93).
152).
.
Chapter 5 Hardware replacement procedures
158).
135