Setting The Information Parameter (Infoscreen) - Duerkopp Adler 869-M PREMIUM Operating Instructions Manual

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018

5.4.10 Setting the Information parameter (InfoScreen)

Information can be displayed on certain settings during sewing as
desired or required.
Fig. 39: Display with information shown
1.9
Possible settings for the Information parameter
Symbol Menu item
Off
Bobbin Cnt
Speed
Position
Mat.Thickness
Pedal
4 +000 +00 -013
10 10
10
Meaning
no display
Bobbin stitch counter
Current speed
Handwheel position
(Value range 000 – 359 [°])
Material thickness detection
Pedal position
(Value range 24 – -2)
10
77