Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 101

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
4. Press the OK button to activate or deactivate the parameter
▲/▼
or use to edit the value and confirm the change by press-
ing the OK button.
Parameters for the current seam section:
Symbol Description
Stitch counter
Length of the seam section
0 = Manually step through
> 1 = Number of stitches or length in mm
Max Speed
Maximum speed for the seam section.
Seg.End Modes
Set what happens at the end of a seam section when
switching to the next section:
• Stop
Sewing stops – if OFF: no more settings possible,
smooth switch between the seams sections
if ON:
• Thread Trim - Thread cutting
• Needle Up - Needle position
• Foot Lifted - Sewing foot lift
• FL height - Sewing foot lift stroke height
Start bartack
Start bartack, setting identical to Manual mode,
 p. 68.
End bartack
End bartack, setting identical to Manual mode,
 p. 72.
Needle Up
Position of the needle when sewing stops on the seam
section.
Foot Lifted
Position of the sewing foot when sewing stops on the
seam section.
99