Table of Contents
Advertisement
96
Symbol
Meaning
Needle thread tension value (%) of current seam section
Value range: 00 - 99
• Use ◄/► to select the Needle thread tension parameter
• Use ▲/▼ to change the needle thread tension.
Information
If the values for the needle thread tension of the right and
the left needle thread are not identical and changed jointly,
the difference remains the same.
2-needle machines
• Use ◄/► to select the needle thread tension parameter
• Press the OK button to open the submenu
• Use ▲/▼ to select the right or the left needle thread
• Press the OK button to confirm
• Use ▲/▼ to change the needle thread tension
• Press the OK button to confirm
Sewing foot pressure
Value range: 01 - 20
• Use ◄/► to select the Sewing foot pressure parameter.
• Use ▲/▼ to change the sewing foot pressure
Stroke
Value range: 00.0 – 09.0 [mm] (0.5 mm increments)
• Use ◄/► to select the Stroke height parameter
• Use ▲/▼ to change the stroke height
Set other parameters for this seam section, p. 98.
5.
6.
To set up another seam section, use
display to switch to the next seam section.
7.
Use
to activate the seam section and set parameters
again as described above.
8.
Repeat steps 6 and 7 to define up to 30 seam sections if
necessary.
9.
Press the ESC button.
The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Programming
▲
on the seam section
Advertisement
Table of Contents
