Table of Contents
Advertisement
126
7.8
Placing the machine head
WARNING
Risk of injury from moving parts!
The machine head is very heavy.
Crushing possible.
Ensure that your hands are not jammed when
inserting the machine head.
NOTICE
Property damage may occur!
Cable may sustain damage and impair the operation of the
machine.
Always lay the cables so as not to create any chafing or
pinching points.
Fig. 65: Placing the machine head (1)
(1) - Screws
To place the machine head:
4.
Place and align the machine head (2) on the tabletop.
5.
Tighten the machine head using the screws (1).
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
①
Setup
Advertisement
Table of Contents
