Table of Contents
Advertisement
Operation
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
For machines with thread clamp (optional)
15. Insert the thread through the left hole of the guide above the
thread clamp.
16. Insert the thread through the left hole of the guide below the
thread clamp.
Fig. 9: Thread clamp
17. Insert the thread into the thread clamp from the left so that
the thread is held in place inside the hook of the clamp.
The thread is supposed to run through the clamp almost without
touching it and in such a way that it only makes contact with the
guides above and below the thread clamp.
18. Feed the thread through the thread guide (14) on the needle
bar.
19. Insert the thread through the needle eye in such a way that
the loose thread end faces the hook.
29
Advertisement
Table of Contents
