Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 72

70
Menu items
Catch Backtack,
Bartack before
the bartack
 p. 71
First Repet.,
Number of stitches
st
different for 1 section
 p. 71
Last Repeti.,
Number of stitches
different for last section
 p. 71
Invert Dir.,
Invert direction
 p. 72
Setting: Number of sections in a bartack (Repetitions)
A bartack always consists of several sections. If the sewing direc-
tion is changed, a new section is started. The number of sections
in a bartack can be set in this submenu.
Setting: Waiting time at turning point (t Change)
The waiting time at the turning points (for example for a change
of sewing direction) is set at this point. A short waiting time in
milliseconds should ensure consistent seam quality (ornamental-
stitch bartack).
Setting: Default stitch length (St.Len.Def.)
If this function is active, the same stitch length is used for the
bartack as the one set in Manual mode. If this function is deacti-
vated, a custom input can be entered.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Setting option 1
On
Stitches (↑)
Stitches (↓)
On
Stitches (↑/↓)
On
Stitches (↑/↓)
ON/OFF
Programming
Setting option 2
ON/OFF
Value range
01 - 50
Value range
01 - 50
ON/OFF
Value range
01 - 50
ON/OFF
Value range
01 - 50