Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 83

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Setting: Stitch length (Stitchlen.)
The stitch length changes slightly depending on the speed.
For this reason, the stitch length can be adjusted at different
speeds by the software.
linear Stitch length
Value range -50 – 50 [%]
Min. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Max. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2.OnOff Min. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
2.On Min. Speed
Value range
0000 – 4000 [rpm]
(depending on subclass)
Maximum stitch length variation
reached at the upper speed limit.
Speed at which the increase/
reduction of stitch length should
start.
Speed up to which the increase/
reduction of stitch length should
occur.
Speed from which the 2
length should be used.
Speed from which the 2
length should be used.
nd
stitch
nd
stitch
81