Table of Contents
Advertisement
92
Fig. 42: Seam section in progress
25
Completed seam sections are shown fully in bold.
Fig. 43: Completed seam section
25
Additional information is shown next to the program bar, which
can be identified at a glance thanks to the small symbols on the
display:
Symbol
Meaning
Start bartack
End bartack
Manually switch between two seam sections (using ◄/►or
button assignment for the push button on the machine arm
or knee button); there is no stitch counting
"10"
Number of stitches or length in mm of the seam section.
The active option, either s.p.m. or mm, can be set at the
Technician level. The s.p.m. option is set at the factory.
Stop at the end of the seam section with thread cutting
Switch between two seam sections without stopping
Switch between two seam sections, with a stop, but
without thread cutting
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Programming
25
25
Advertisement
Table of Contents
