Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 87

Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Setting: Sewing foot stroke (Stroke)
The sewing foot stroke can be adjusted to different material
thicknesses by the software.
linear Stroke
Value range 00 – 09 [mm]
ThickMin
Value range 00.0 – 10.0 [mm]
ThickMax
Value range 00.0 – 10.0 [mm]
2.OnOff ThickMin
Value range 00.0 – 10.0 [mm]
2.On ThickMax
Value range 00.0 – 10.0 [mm]
Maximum sewing foot
stroke reached at the
upper material thickness
limit.
Material thickness at which
the increase in sewing foot
stroke should start.
Material thickness up to
which the increase in
sewing foot stroke should
occur.
Material thickness from
nd
which the 2 sewing foot
stroke should be used.
Material thickness from
nd
which the 2 sewing foot
stroke should be used.
85