Table of Contents
Advertisement
66
Symbol
Meaning
nd
2
Moves to the position for the 2
Edge stop reference run
If the edge stop has lost its correct position due to an
interruption, the reference run returns it to its starting
position.
Possible button assignment for the softkey button
(Automatic mode)
Symbol
Meaning
Threading mode
The needle bar moves to the defined position.
The pedal is temporarily locked.
Reset daily piece counter.
Automatic stitch counting
Function active or inactive.
Programming
Activation of programming mode.
BEFORE
the seam
Bobbin mode
BEFORE
the seam
Perform half stitches
Half stitches are performed when the button is pressed
(needle position raised or lowered).
IN the seam
Resetting the bobbin stitch counter
The defined maximum s.p.m. of the bobbin used is
reset to the starting value.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
edge stop distance
Programming
nd
edge stop distance.
Advertisement
Table of Contents
