Table of Contents
Advertisement
Programming
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Symbol
Description
Stitch length correction factor
Value range: -50 – 50 [%]
Alters the stitch length in all seam sections
with ▲/▼.
Default needle thread tension adjustment
factor
Value range: -50 – 50 [%]
Alters the needle thread tension in all
seam sections with ▲/▼.
Day piece counter
Function active or inactive, p. 100.
Information on the display
Can be assigned differently as desired, p. 77.
5.5.1
Sewing in Automatic mode
After selecting a program between 001 and 999, you will be in
Automatic mode.
To sew in Automatic mode:
1.
Press the pedal forward and sew.
The following display appears:
Fig. 41: Display when sewing in Automatic mode
1.9
The parameter values for the current seam section are shown on
the display.
The program bar shows the progress of the seam program.
The number under the current seam section shows the number
of stitches yet to be sewn / the outstanding length of the seam
section.
The program bar shows half the current seam section in bold.
2
6.0
25
8 8.0
10
10
Allows for finer
adjustment
than by setting
the parameters
directly.
10
10
91
Advertisement
Table of Contents
