Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 52

50
Functions of the buttons
Button Function
Sewing backwards
When this button is activated, the machine sews in
reverse.
Needle position
When this button is activated, the needle moves to a
specific position.
This position is determined individually via the
parameter settings. For more information, refer to the
 Service Instructions.
The machine comes configured so that selecting the
button will bring the needle up to the top dead center.
Start bartack/end bartack
This button cancels the general setting for sewing start
and end bartacks. If bartacks are on, pressing the button
skips the next bartack. If bartacks are off, pressing the
button sews the next bartack.
Stitch length
When this button is selected, the machine sews with the
greater stitch length that was programmed for this stitch
length on the control panel.
Auxiliary thread tension
+/– +/–
When this button is selected, the machine sews with the
programmed auxiliary thread tension.
Fully customizable
The button is fully customizable.
The machine comes configured so that the machine will
switch to the next seam section when the button is
pressed.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Operation