Adjusting Parameters For The Selected Program - Duerkopp Adler 869-M PREMIUM Operating Instructions Manual

100
Symbol Description
FL height
Lifting height of the sewing foot when sewing stops on
the seam section.
Backwards
Backward stitches; when the parameter is activated,
the section is sewn backwards.
Puller
Supports the transport of the sewing material, setting
identical to Manual mode,  p. 78.
Center Guide
Seam middle guide (only on 2-needle machines)
EdgeGuide
• Distance
Edge stop (if available); value for the distance
between the needle and the material edge, setting
identical to Manual mode,  p. 78.
Light barrier
Detects the beginning or the end of the material, setting
identical to Manual mode,  p. 88.
Output
To be assigned specifically for each customer,
 p. 89.
5. Exit the submenu using the ESC or
 The changed values are stored immediately.
6. If necessary, create further seam sections or exit Programming
mode using the ESC button.
 The program is saved. The machine switches to Automatic
mode and the newly created program is selected.
5.6.5

Adjusting parameters for the selected program

This menu allows the parameters for the current program/seam
program to be changed. This setting affects all seam sections
created in the program.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Programming
◄
button