Duerkopp Adler 869-M PREMIUM Operating Instructions Manual page 88

86
Setting: Stitch length (Stitchlen.)
The stitch length changes slightly depending on the material thick-
ness. For this reason, the stitch length can be adjusted at different
material thicknesses by the software.
linear stitch length.
Value range -50 – 50 [%]
ThickMin
Value range 00.0 – 10.0 [mm]
ThickMax
Value range 00.0 – 10.0 [mm]
2.OnOff ThickMin
Value range 00.0 – 10.0 [mm]
2.On ThickMin
Value range 00.0 – 10.0 [mm]
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
Programming
Maximum stitch length
variation reached at the
upper material thickness
limit.
Material thickness at which
the increase/reduction of
stitch length should start.
Material thickness up
to which the increase/
reduction of stitch length
should occur.
Material thickness from
nd
which the 2 stitch length
should be used.
Material thickness from
nd
which the 2 stitch length
should be used.