Table of Contents
Advertisement
38
Fig. 17: Winding the hook thread (2)
③
④
⑤
(3) - Thread guide
(4) - Thread guide
4.
Feed the thread counterclockwise from the thread guide (4)
around the pre-tensioner (5).
5.
Insert the thread in a wavelike manner through the 2 holes of
the thread guide (3): from bottom to top through the left hole
and from top to bottom through the right hole.
6.
Guide the thread to the bobbin (6).
Fig. 18: Winding the hook thread (3)
⑦
(7) - Bobbin lever
(8) - Bobbin shaft
7.
Clamp the thread behind the cutter (9) and tear off the loose
end behind it.
8.
Fit the bobbin on the bobbin shaft (8).
9.
Turn the bobbin clockwise until it clicks.
10. Pull the bobbin lever (7) up.
Operating Instructions 868-M PREMIUM - 02.0 - 01/2018
(5) - Pre-tensioner
(6) - Winder
⑨
⑧
(9) - Cutter
Operation
⑥
Advertisement
Table of Contents
