Advertisement
1-2-6 Installing the IC card reader holder (option)
IC card reader holder installation requires the following parts:
Parts
IC card reader holder
Supplied parts of IC card reader holder (B4714):
Parts
IC card reader holder
Label
Bundling band
Hook and loop fastener
Spacer
* : Not used in this model.
Procedure
1. Press the power key on the operation
panel to off. Make sure that the power
indicator and the memory indicator are
off before turning off the main power
switch. And then unplug the power
cable from the wall outlet.
2. Remove the staple holder.
3. Remove a screw and then remove the
staple cover.
Y116141-8
Quantity
Part.No.
B4714 (option)
1
Quantity
Part.No.
1
1
1*
2
2
Staple cover
Screw
1-2-37
-
-
-
-
-
Staple holder
Figure 1-2-48
2NP
Service Manual
Advertisement
