Advertisement
16. Pass the key counter electrical wires
through the edging.
17. Connect the connector of the key
counter electrical wires to the connector
of the option PWB.
18. Fit the scanner rear cover using two
screws.
19. Fit the right upper cover.
Note: Pass the connector of the key
counter wire through the aperture (right
side) in the right upper cover.
Note: Be careful not to put a key coun-
ter electric wire with the upper right
cover.
20. Fit the scanner right cover using two
screws.
21. Fit the tray stay to the scanner right
cover using two screws.
Y116141-8
Edging
Connector
Figure 1-2-36
Scanner right cover
Key counter
electrical wires
Aperture
Key counter
electrical wires
Figure 1-2-37
1-2-29
Key counter
electrical wires
Option PWB
Tray stay
M4 x 10 screw
M4 x 10 screw
Service Manual
2NP
Advertisement
